OEM weighing board for interfacing up to 8 digital load cells to PLCs, PCs etc. This weighing board is developed for OEM use. It can be equipped with customized protocols.

Type: 5008OEM

Interface: RS485, EtherNet, EtherCAT (pending)

Special features:

• Interfaces: RS485, EtherNet and EtherCAT (pending)
• Made in Denmark
• Weighing board for up to 8 digital load cells
• Plug-and-play installation with pre-calibrated digital load cells
• Advanced digital filters (configurable)
• Setup via dip switches
• Connectors for up to 8 digital load cells and power supply 24Vdc, min. 2A
• Application software can be made by request

Options:

• Weighing board for up to 16 digital load cells
• Prepared for panel mounting
• Mounted in stainless steel housing
• Customized application software
• OEM version

Strain gage output weighing module. Featuring a small LED display, EtherNet interface, I/O for remote zero/tare and connectors for up to four digital load cells. This module is developed for customers who want the benefits from using Eilersen digital load cells but cannot change existing equipment designed for analog strain gage load cells.

Type: 5429

Interface: Strain gage output (mV/V) and EtherNet interface

Special features:

• Strain gage mV/V output
• Made in Denmark
• Digital EtherNet interface
• Six character LED display
• I/O for remote zero/tare
• Weighing module for up to 4 digital load cells
• Shows the weight on each of the connected load cells
• Shows the summed weight for the connected load cells
• Configurable measuring time
• 16bit D/A converter
• 16 different FIR filters selectable by dip switches
• Application specific software can be made by request
• Plug-and-play installation with Eilersen digital load cells

Options:

• Prepared for panel mounting on DIN rail
• Mounted in stainless steel housing
• Customized application software
• OEM version

ATEX certified (zone 1, 2, 21, 22) PROFINET interface module. For directly interfacing up to four digital ATEX load cells via PROFINET. The interface module type 4X70A can also be used in non-ATEX installations.

Type: 4X70A

Interface: PROFINET

Special features:

• PROFINET output
• Made in Denmark
• Weighing module for up to 4 digital load cells
• For ATEX and non-ATEX applications
• Plug-and-play installation with Eilersen digital load cells
• Advanced digital filters (configurable)
• A ”Digital Junction Box” that can be mounted near the load cells or in a central panel
• Small Form Factor
• Setup via dip switches
• For ATEX when supplied by power supply type 4051A
• Application software can be made by request
• The power supply 4051A and module type 4X70A must be installed outside the hazardous zone

Options:

• Prepared for panel mounting on DIN rail
• Mounted in stainless steel housing
• Customized application software
• OEM version

Eilersen designs customized robust digital load cells for industrial applications. For example on-board truck weighing, crane scales, offshore installations, web tension measurement and heavy duty applications. Eilersen also develops and produces robust load cells for specific customer applications. OIML and ATEX certified versions are available.

Type: Customized Digital Load Cells

Capacity (Emax): Bending beam load cells up to 50tons. Compression load cells up to 500tons. Tension load cells up to 100tons. Web tension measurement up to 100kN

Accuracy: Depends on load cell and application

Overload tolerance: Up to 1000% of rated capacity

Special features:

• Robust capacitive technology
• Made in Denmark
• Stainless steel
• Patented high reliability capacitive sensor
• High tolerance of up to 1.000% overload
• Laser welded
• Hermetically sealed to IP68
• High accuracy, High resolution
• Digital filters
• Cable length up to 100meters
• Calibration independent of cable length
• Load cell cable replaceable
• Capacity (Emax):
  Bending beam load cells up to 50tons
  Compression load cells up to 500tons
  Tension load cells up to 100tons
  Web tension measurement up to 100kN
• Accuracy: Depends on load cell and application
• Easy mechanical and electrical installation
• Withstands welding voltages and ESD
• Optional special load cell cable
• Optional accuracy according to OIML R60
• Optional ATEX version (Zone 1, 2, 21, 22)

Options:

• Load cell capacity
• Load cell material
• Epoxy or other coating
• Load cell dimensions
• Load cell cable type and length
• Special PE load cell cable available for freezing low temperature (can be used down to -50 degrees Celsius)
• Special Teflon load cell cable available for very high temperature (can be used up to 100 degrees Celsius)
• Load cell accuracy according to OIML R60
• Load cell ATEX version (Zone 1, 2, 21, 22)

Click here for examples of Customized Digital Load Cells

Robust digital heavy duty (ATEX certified) beam load cell produced in stainless steel and hermetically sealed to IP68. For example for process weighing, industrial weighing and tough applications such as on-board truck weighing, offshore, steel industry etc. The BBM(A)70 load cell can be used in ATEX (Ex) and non-ATEX applications.

Type: BBM70 (Non-ATEX), BBM(A)70 (ATEX), 

Capacity (Emax): 1000, 2000, 3000 kg

Accuracy: Industrial 0.10%, Precision 0.05%, High Precision 0.025%

Overload tolerance: Up to 1.000% of rated capacity

Special features:

• BBM(A) is ATEX certified (Zone 1, 2, 21, 22)
• Stainless steel
• Made in Denmark
• Robust capacitive technology
• High tolerance of up to 1.000% overload
• Hermetically sealed to IP68
• High accuracy, High resolution
• Can be supplied with Mud resistant and Halogen free cables for offshore installation
• Digital filters
• Laser welded
• Cable length up to 100meters
• Capacity (Emax): 1000, 2000, 3000kg
• Accuracy: Industrial 0.10%, Precision 0.05%, High Precision 0.025%
• Calibration independent of cable length
• Load cell cable replaceable
• Easy mechanical and electrical installation
• Withstands welding voltages and ESD
• Can be used in both ATEX and non-ATEX installations

Options:

• ATEX (Zone 1, 2, 21, 22) version type BBMA
• ATEX II 2G Ex ia IIC T6 / ATEX II 2D Ex iaD 21 T85°C
• Mounting kits available
• Customized versions available
• Load cell cable length 10, 20, 50 or 100meters
• Mud resistant and Halogen free cables for offshore installation
• Special PE load cell cable available for freezing low temperature (can be used down to -50 degrees Celsius)
• Special Teflon load cell cable available for very high temperature (can be used up to 100 degrees Celsius)

Click here for examples of BBMA70 Digital Beam Load Cells

Robust digital heavy duty (ATEX certified) beam load cell produced in stainless steel and hermetically sealed to IP68. For example for process weighing, industrial weighing and tough applications such as on-board truck weighing, offshore, steel industry etc. The BBM(A)80 load cell can be used in ATEX (Ex) and non-ATEX applications.

Type: BBM80 (Non-ATEX), BBM(A)80 (ATEX), 

Capacity (Emax): 5000, 6000, 7000 kg

Accuracy: Industrial 0.10%, Precision 0.05%, High Precision 0.025%

Overload tolerance: Up to 1.000% of rated capacity

Special features:

• BBM(A) is ATEX certified (Zone 1, 2, 21, 22)
• Stainless steel
• Made in Denmark
• Laser welded
• Robust capacitive technology
• High tolerance of up to 1.000% overload
• Hermetically sealed to IP68
• High accuracy, High resolution
• Can be supplied with Mud resistant and Halogen free cables for offshore installation
• Digital filters
• Can be used in both ATEX and non-ATEX installations
• Cable length up to 100meters
• Capacity (Emax): 5000, 6000, 7000kg
• Accuracy: Industrial 0.10%, Precision 0.05%, High Precision 0.025%
• Calibration independent of cable length
• Load cell cable replaceable
• Easy mechanical and electrical installation
• Withstands welding voltages and ESD

Options:

• ATEX (Zone 1, 2, 21, 22) version type BBMA
• ATEX II 2G Ex ia IIC T6 / ATEX II 2D Ex iaD 21 T85°C
• Mounting kits available
• Customized versions available
• Load cell cable length 10, 20, 50 or 100meters
• Mud resistant and Halogen free cables for offshore installation
• Special PE load cell cable available for freezing low temperature (can be used down to -50 degrees Celsius)
• Special Teflon load cell cable available for very high temperature (can be used up to 100 degrees Celsius)

Click here for examples of BBMA80 Beam Load Cells

The robust digital SLCAD and SLCAD-ST load cells are designed primarily for measuring web tension. The load cell type SLCAD-ST offers extra safety in applications with heavy rollers and increased temperature compensation.

Type: SLCAD & SLCAD-ST

Capacity (Emax): 200, 500N, 1, 2, 5kN

Accuracy: Industrial 0.25%, Precision 0.10%

Overload tolerance: Up to 1.000% of rated capacity

Special features:

• Robust capacitive technology
• Made in Denmark
• Patented high reliability capacitive sensor
• High tolerance of up to 1.000% overload
• Sealed to IP67
• Withstands welding voltages and ESD
• Same dimensions as ABB PFTL 101A web tension load cell
• Capacity (Emax): 200, 500N, 1, 2, 5kN
• Accuracy: Industrial 0.25%, Precision 0.10%
• Calibration independent of cable length
• Pre-calibrated with signal in kg or N
• Easy mechanical and electrical installation
• Cable length up to 100meters

Options:

• Free application software
• Type SLCAD-ST with extra safety and temperature range
• Customized versions available
• Load cell cable length 10, 20, 50 or 100meters
• Special PE load cell cable available for freezing low temperature (can be used down to -50 degrees Celsius)
• Special Teflon load cell cable available for very high temperature (can be used up to 100 degrees Celsius)

Click here for examples of Web Tension Digital Load Cells

The robust digital SLCAD-101B load cell is a heavy duty version designed primarily for measuring web tension. The SLCAD-101B load cell has the same dimensions as the ABB PFTL 101B load cell.

Type: SLCAD-101B

Capacity (Emax): 200, 500N, 1, 2, 5kN

Accuracy: Industrial 0.25%, Precision 0.10%

Overload tolerance: Up to 1.000% of rated capacity

Special features:

• Robust capacitive technology
• Made in Denmark
• Patented high reliability capacitive sensor
• High tolerance of up to 1.000% overload
• Sealed to IP67
• Withstands welding voltages and ESD
• Same dimensions as ABB PFTL 101B
• Capacity (Emax): 2, 5, 10, 20kN
• Accuracy: Industrial 0.25%, Precision 0.10%
• Cable length up to 100meters
• Calibration independent of cable length
• Easy mechanical and electrical installation
• Pre-calibrated with signal in kg or N

Options:

• Free application software
• Customized versions available
• Load cell cable length 10, 20, 50 or 100meters
• Special PE load cell cable available for freezing low temperature (can be used down to -50 degrees Celsius)
• Special Teflon load cell cable available for very high temperature (can be used up to 100 degrees Celsius)

Click here for examples of Web Tension Digital Load Cells

The robust digital tension load cell type SOTD is produced in stainless steel. It is used for weighing suspended vessels, in cranes, lifts and for measuring forces in heavy duty equipment. ATEX versions are available.

Type: SOTD

Capacity (Emax): 2000, 5000, 10000, 20000 kg

Accuracy: Industrial 0.10%

Overload tolerance: Up to 1.000% of rated capacity

Special features:

• Robust capacitive technology
• Made in Denmark
• Patented high reliability capacitive sensor
• High tolerance of up to 1.000% overload
• Stainless steel
• Sealed to IP67
• Cable length up to 100meters
• Withstands welding voltages and ESD
• Capacity (Emax): 2000, 5000, 10000, 20000kg
• Accuracy: Industrial 0.10%
• Load cell cable replaceable
• Pre-calibrated with signal in kg or N
• Calibration independent of cable length
• Easy mechanical and electrical installation

Options:

• Customized versions available
• Load cell cable length 10, 20, 50 or 100meters
• Special PE load cell cable available for freezing low temperature (can be used down to -50 degrees Celsius)
• Special Teflon load cell cable available for very high temperature (can be used up to 100 degrees Celsius)

Click here for examples of SOTD Digital Tension Load Cells

Robust digital (ATEX certified) compression load cell produced in stainless steel and hermetically sealed to IP68. For example for hygienic weighing installations, installations in tough environments and general process weighing. The DM(A) compression load cell can be used in ATEX (Ex) and non-ATEX applications.

Type: DM (Non-ATEX), DM(A) (ATEX)

Capacity (Emax): 6000, 8000, 10000, 15000, 25000, 50000 kg

Accuracy: Industrial 0.10%, Precision 0.05%

Overload tolerance: Up to 400% of rated capacity

Special features:

• DM(A) is ATEX certified (Zone 1, 2, 21, 22)
• Made in Denmark
• Robust capacitive technology
• High tolerance of up to 400% overload
• Stainless steel
• Hermetically sealed to IP68
• Laser welded
• Low profile and hygienic design
• Can be supplied with Mud resistant and Halogen free cables for offshore installation
• Withstands welding voltages and ESD
• Capacity (Emax): 6000, 8000, 10000, 15000, 25000, 50000kg
• Accuracy: Industrial 0.10%, Precision 0.05%
• Load cell cable replaceable
• Pre-calibrated with signal in kg or N
• Calibration independent of cable length
• Cable length up to 100meters
• Easy mechanical and electrical installation
• Can be used in both ATEX and non-ATEX installations

Options:

• ATEX (Zone 1, 2, 21, 22) version type DMA
• ATEX II 2G Ex ia IIC T6 / ATEX II 2D Ex iaD 21 T85°C
• Mud resistant and Halogen free cables for offshore installation
• Base plate available
• Load cell cable length 10, 20, 50 or 100meters
• Special PE load cell cable available for freezing low temperature (can be used down to -50 degrees Celsius)
• Special Teflon load cell cable available for very high temperature (can be used up to 100 degrees Celsius)

Click here for examples of DMA Digital Compression Load Cells