Robust digital (ATEX certified) heavy duty compression load cell produced in stainless steel and hermetically sealed to IP68. For example for installation under large silos, tanks, vessels and heavy duty applications. The DH(A)500 load cell can be used in ATEX (Ex) and non-ATEX applications.

Type: DH500 (Non-ATEX), DH(A)500 (ATEX)

Capacity (Emax): 200, 300, 400, 500 tons

Accuracy: Industrial 0.25%

Overload tolerance: Up to 300% of rated capacity

Special features:

• Made in Denmark
• DH(A) 500 is ATEX certified (Zone 1, 2, 21, 22)
• Robust capacitive technology
• High tolerance of up to 300% overload
• Stainless steel
• Hermetically sealed to IP68
• Laser welded
• Can be supplied with Mud resistant and Halogen free cables for offshore installation
• Withstands welding voltages and ESD
• Capacity (Emax): 200, 300, 400, 500tons
• Accuracy: Industrial 0.25%
• Cable length up to 100meters
• Load cell cable replaceable
• Pre-calibrated with signal in kg or kN
• Calibration independent of cable length
• Easy mechanical and electrical installation
• Can be used in both ATEX and non-ATEX installations

Options:

• ATEX (Zone 1, 2, 21, 22) version type DHA
• ATEX II 2G Ex ia IIC T6 / ATEX II 2D Ex iaD 21 T85°C
• Load cell cable length 10, 20, 50 or 100meters
• Mud resistant and Halogen free cables for offshore installation
• Special PE load cell cable available for freezing low temperature (can be used down to -50 degrees Celsius)
• Special Teflon load cell cable available for very high temperature (can be used up to 100 degrees Celsius)

Click here for examples of DH DHA Digital Compression Load Cells

Robust digital (ATEX certified) heavy duty compression load cell produced in stainless steel and hermetically sealed to IP68. For example for installation under large silos, tanks, vessels and heavy duty applications. The DH(A)100 load cell can be used in ATEX (Ex) and non-ATEX applications.

Type: DH100 (Non-ATEX), DH(A)100 (ATEX)

Capacity (Emax): 100 tons

Accuracy: Industrial 0.25%

Overload tolerance: Up to 300% of rated capacity

Special features:

• DH(A)100 is ATEX certified (Zone 1, 2, 21, 22)
• Made in Denmark
• Robust capacitive technology
• High tolerance of up to 300% overload
• Stainless steel
• Hermetically sealed to IP68
• Laser welded
• Can be supplied with mud resistant and halogen free cables for offshore installation
• Withstands welding voltages and ESD
• Can be used in both ATEX and non-ATEX installations
• Capacity (Emax): 100tons
• Accuracy: Industrial 0.25%
• Cable length up to 100meters
• Load cell cable replaceable
• Pre-calibrated with signal in kg or kN
• Calibration independent of cable length
• Easy mechanical and electrical installation

Options:

• ATEX (Zone 1, 2, 21, 22) version type DHA
• ATEX II 2G Ex ia IIC T6 / ATEX II 2D Ex iaD 21 T85°C
• Load cell cable length 10, 20, 50 or 100meters
• Mud resistant and Halogen free cables for offshore installation
• Special PE load cell cable available for freezing low temperature (can be used down to -50 degrees Celsius)
• Special Teflon load cell cable available for very high temperature (can be used up to 100 degrees Celsius)

Click here for examples of DH DHA Compression Load Cells

Robust digital (ATEX certified) beam load cell for dynamic weighing, process weighing and general industrial weighing. Application examples are belt scales, platform scales, small vessels, filling machines, process equipment etc. in ATEX (Ex) environment. The load cell can also be used in non-ATEX (ex) rated area.

Type: BBL (Non-ATEX), BBL(A) (ATEX), 

Capacity (Emax): 2, 5, 10, 20, 30, 50, 100, 150, 250, 500, 1000 kg

Accuracy: Industrial 0.10%, Precision 0.05%, High Precision 0.025%

Overload tolerance: Up to 1000% of rated capacity

Special features:

• BBL(A) is ATEX certified (Zone 1, 2, 21, 22)
• Made in Denmark
• Can be used in both ATEX and non-ATEX installations
• Stainless steel
• Robust capacitive technology
• High tolerance of up to 1.000% overload
• Hermetically sealed to IP68
• Laser welded
• Can be supplied with Mud resistant and Halogen free cables for offshore installation
• Cable length up to 100meters
• Calibration independent of cable length
• High accuracy, High resolution
• Capacity (Emax): 2, 5, 10, 20, 30, 50,100, 150, 250, 500, 1000kg
• Accuracy: Industrial 0.10%, Precision 0.05%, High Precision 0.025%
• Load cell cable replaceable
• Withstands welding voltages and ESD
• Easy mechanical and electrical installation

Options:

• ATEX (Zone 1, 2, 21, 22) version type BBLA
• ATEX II 2G Ex ia IIC T6 / ATEX II 2D Ex iaD 21 T85°C
• Mounting kits available
• Load cell cable length 10, 20, 50 or 100meters
• Mud resistant and halogen free cables for offshore installation
• Special PE load cell cable available for freezing low temperature (can be used down to -50 degrees Celsius)
• Special Teflon load cell cable available for very high temperature (can be used up to 100 degrees Celsius)

Click here for examples of BBL BBLA Digital Beam Load Cells

Compact digital beam load cell for dynamic weighing, web tension measurement, process weighing, force measurement and general industrial weighing. This load cell is a short version of the SD beam load cell. It is produced in stainless steel and laser welded (IP68).

Type: SDC

Capacity (Emax): 1, 2, 5, 10, 20, 30, 50, 100 kg

Accuracy: Industrial 0.10%, Precision 0.05%, High Precision 0.025%

Overload tolerance: 500% at 2kg, 200% at 100kg capacity

Special features:

• Short version of SD load cell
• Stainless steel
• Made in Denmark
• Robust capacitive technology
• Patented high reliability capacitive sensor
• High tolerance of up to 1.000% overload
• Hermetically sealed to IP68
• Laser welded
• High accuracy, High resolution
• Small deflection at rated capacity
• Capacity (Emax): 1, 2, 5, 10, 20, 30, 50, 100kg
• Accuracy: Industrial 0.10%, Precision 0.05%, High Precision 0.025%
• High resonance frequency (spring rate) for rapid dynamic weighing
• Digital filters
• Cable length up to 100meters
• Calibration independent of cable length
• Easy mechanical and electrical installation
• Withstands welding voltages and ESD
• Load cell cable replaceable

Options:

• Load cell cable length 10, 20, 50 or 100meters
• Special Teflon load cell cable available for very high temperature (can be used up to 100 degrees Celsius)
• Special PE load cell cable available for freezing low temperature (can be used down to -50 degrees Celsius)

The Eilersen team has experience, speed and flexibility. This ensures that customized weighing solutions can be developed in due time for customers with special requirements. They have designed a host of customized load cells through more than 40 years for applications like on-board truck weighing, force measurement, offshore installations, web tension measurement and many other applications.

The Eilersen customized load cells can optionally be supplied in OIML and ATEX certified versions.

Related industries:

• mining
• energy
• offshore
• machine building
• engineering and consulting

 Related products:

• Customized digital load cells

 Click here for examples of Customized Weighing Solutions

Digital weighing solutions for installation in ATEX zone 1, 2, 21 and 22. Eilersen ATEX load cells tolerate up to 1000% overload. They are supplied with up to 100meter cable length.

Related industries:

• Food
• Mining
• Energy
• Pharma
• Offshore
• Chemical
• Petrochemical

Related products:

• ATEX scales
• ATEX modules
• ATEX loadcells

Click here for examples of ATEX Applications Weighing Solutions

• Easy disassembly using a SMS type nut
• Sealing option for a pre-established setting

Materials

• Body and plug: stainless steel 1.4404 / 316L
• Seal: fluorinated elastomer (FKM) - EPDM
• Adjusting device: stainless steel 1.4301 / 304

Service conditions

• Max. temperature: +120^oC/+248^oF
• Min. temperature: 0^oC/+32^oF
• Adjustment range: 0 to 13 bar (1300 kPa)/0 to 189 psi

Connections

• Welded / SMS - DIN - US standard

• Manual forced opening device for 4" precision

Materials

• Valve: stainless steel 1.4404 / 316L
• Pressure plug: PTFE
• Seal: fluorinated elastomer (FKM) - silicon

Service conditions

• Max. temperature: +80^oC/+176^oF
• Min. temperature: 0^oC/+32^oF
• Vacuum: 30 mbar
• Pressure: 0.2 to 2 bar/3 to 29 psi depending on spring 

Connections

• Clamp

• Non-return valve with full bore
• Quick disassembly using a SMS type nut

Materials

• Body - plug - spring: stainless steel 1.4404 / 316L
• Plug seal: PFA
• Seal: fluorinated elastomer (FKM) - EPDM - PFA

Service conditions

• Max. temperature: +120^oC/+248^oF
• Min. temperature: 0^oC/+32^oF
• Max. working pressure: 10 bar (1000 kPa)/145 psi
• Counterpressure: 90 mbar 

Connection types / Standards

• Welded / SMS - DIN - US standard
• Threaded / SMS - DIN
• Liner-nut / SMS - DIN
• Clamp / US standard

Option

• Metal/metal tightness (requiring pairing)

Features

• Valves used for auxiliary circuits
• Available with full or reduced port

Materials

• Stainless steel 1.4404 / 316L and PTFE

Service conditions

• Max. temperature: +160^oC/+320^oF
• Min. temperature: -30^oC/-22^oF
• Max. working pressure: 20 bar (2000 kPa)/290 psi
• Actuator air supply pressure: min. 5.5 bar (550 kPa)/80psi, max. 8 bar (800 kPa)/116 psi

Connections

CONNECTION TYPES / STANDARDS

• To weld / ISO - SMS - DIN